Curtain wall glazing
For multi-bay external elevations. Identify the visible grid, floor edges, fixed glazing and opening locations on the elevation; support conditions and joints need a project-specific review.
Architectural aluminum · Project configuration
Curtain Walls & Facade Systems
A glazed elevation, a shop entrance and an overhead skylight meet the building in different ways. Start with the facade layout and its connections, then coordinate glass, aluminum members, opening panels and finishes as one project scope.
Application visual showing how the system integrates into the building facade.
A corner, opened to light.
Glass turns the corner. A quiet grid gives the gallery its rhythm.
Building envelope
Where this system belongs
This group concerns the exterior building envelope and facade. Interior room division belongs to glass partitions; balcony edge protection belongs to railings. Aluminum cladding and screens are facade sub-configurations, not a substitute for the glazed weather enclosure.
Choose by application
These are configuration directions for review. Materials, assemblies, suitability and supply scope are subject to the confirmed project documents.
Configuration visuals show how YULUX systems integrate into real building projects. Dimensions, construction and supply scope are confirmed during the quotation process.
Storefronts & entrance glazing
For shopfronts, showrooms and ground-floor entrances. Coordinate display glazing with door operation, threshold levels, signage and the surrounding wall rather than treating the door as an isolated item.
A view into the shop.
The display draws the eye. The paired doors give visitors a clear way inside.
Skylights & glazed roofs
For overhead daylight openings and covered circulation areas. Roof slope, water discharge, overhead glazing requirements, cleaning access and the supporting structure must be agreed together.
Light from above.
An atrium gathers people beneath a shared roof. Start with the space below, then work through the glazing divisions and roof connections.
Aluminum panels & facade screens
For opaque facade zones, louvers and decorative grilles. Mark panel divisions, returns, fixing access and the intended visual openness. Ventilation, shading or weather protection requirements require separate confirmation.
Where the facade becomes solid.
Opaque panels sit alongside the glazed areas. Their joints and corner returns belong in the same elevation drawing.
Another layer at the window.
Horizontal blades extend above the glass. A vertical grille adds a different rhythm beside it.
Three decisions before choosing a system
Begin at the building connection
Provide floor-edge and wall sections, substrate information and available fixing zones. A matching facade appearance does not establish that the same connection detail will work on another building.
Separate appearance from performance
Choose sightlines, visible caps, glass appearance and finish direction, then submit the project’s wind, water, thermal, acoustic or fire requirements for verification. No performance is implied by the illustration.
Plan openings and maintenance
Locate entrance doors, opening vents, drainage outlets and cleaning access before locking the grid. Confirm who supplies interfaces to adjacent roofing, waterproofing and building services.
What to prepare for a quotation
Send drawings if you have them, and mark undecided items for review. Define the project scope before comparing prices.
Get a Quote for This Product- Project country, building use and facade elevations with quantities
- Plans and sections showing floor edges, openings and supporting structure
- Required glass build-up, visual appearance and finish references
- Design loads and applicable local performance or approval requirements
- Entrance hardware, opening vents, drainage and waterproofing interfaces
- Supply, engineering, installation and unloading responsibilities
From project drawings to an agreed package
Mark the facade scope
Separate glazed bays, entrances, skylights and opaque panels on the drawings. Flag missing dimensions and interfaces.
Review the connections
Coordinate system direction, glass, anchors, drainage and opening hardware against the supplied project information.
Confirm before ordering
Agree the reviewed drawings, finish references, itemized quotation and supply boundaries. Required engineering and approvals remain project-specific.
Plan delivery by elevation
Confirm member and panel identification, packing sequence, handling access and installation handover requirements before release.
For the rest of your project
Keep related systems in one project list
Add this system, explore related products, then enter quantities and notes in your project list before submitting drawings and requirements.